Help a not so newbie out please..advice on setup for 91,82,110,129,118,119

[ibrampton]

Hey everyone

I have a dreamlink hd, I'm using it for bev and dn.

I have a 4-way DiSEqc SW 1.0 switch.

1 = Bev (I've put both 82 & 91 LNB's into one switch before attaching it into the DiSEqc slot 1)
2 = 110
3 = 118.8 and 119
4 = 129

However, after 24-48 hours later most of my Bev channels began to dissappear, I would scan again and they wouldn't appear. I would do a manual scan and same thing. After a week? My Bev (slot 1) stopped working, Dream Link Hd would not lock onto those satelites.

It turns out that my DiSEqc switch's number 1 slot isn't working, all others (DN) are working fine. No issues.

The setup I have? Is it not right? Is it not meant for a dreamlink? What can be the issue?

This has happened to me twice btw.

Sorry if I have some of the terms and words wrong, I am new at this. I followed how a professional had it setup for me. We've been having this problem so that's why I've turned to you guys for help..or advice.

Please help me out fellas!
Much appreciated.

Happy holidays

[steven charles]

friend you shoud try posting what dish and lnbs your using on your setup,and the settings for each sat,but for all sats there ain,t enough power,you should try getting a dp44 or power inserter and thats assuming your using dp lnbs....

[bacardiparti_85]

hi i got same issue im using 82,91 for all other single lnb, same setting.i got 91 signal but no 82
have u got in right ?

Hey everyone

I have a dreamlink hd, I'm using it for bev and dn.

I have a 4-way DiSEqc SW 1.0 switch.

1 = Bev (I've put both 82 & 91 LNB's into one switch before attaching it into the DiSEqc slot 1)
2 = 110
3 = 118.8 and 119
4 = 129

However, after 24-48 hours later most of my Bev channels began to dissappear, I would scan again and they wouldn't appear. I would do a manual scan and same thing. After a week? My Bev (slot 1) stopped working, Dream Link Hd would not lock onto those satelites.

It turns out that my DiSEqc switch's number 1 slot isn't working, all others (DN) are working fine. No issues.

The setup I have? Is it not right? Is it not meant for a dreamlink? What can be the issue?

This has happened to me twice btw.

Sorry if I have some of the terms and words wrong, I am new at this. I followed how a professional had it setup for me. We've been having this problem so that's why I've turned to you guys for help..or advice.

Please help me out fellas!
Much appreciated.

Happy holidays

[dishuser]

friend you shoud try posting what dish and lnbs your using on your setup,and the settings for each sat,but for all sats there ain,t enough power,you should try getting a dp44 or power inserter and thats assuming your using dp lnbs....
not enough power?