NFusion HD receiver and Dish 1000 set-up

[Heresjonnie]

Will a Dish Network 1000.4 Eastern Arc dish work with the NFusion HD receiver. If so, I would appreciate some help in setting it up.

If not what type of dish and LNB set-up do I need for it to work.

Thanks!!

[gwrowe]

I can't see why not, as long as it is supported by your P$.

[hifreq]

It will work but there are some limitations. You will get most if not all HD tps. However you will not get many of the horizontal
TPs on 119 & 110sats. Problem is the frquencies for them are higher which the Nfusion HD can not detect/demodulate or recognize ?????
I have tested the Nfusion HD with a 1000.2 western arc and this is what I expierenced. Better off using legacy type lnbs. That way you will get all the SD and HD tps.

A 18" dish with 2 lnbs for 119 & 110 and a second dish for 129. Use a good 4x1 switch. Also can use an eliptical dish of 28 to 30"
with 3 lnbs. You will need to set the skew after getting aligned for 119 bird. Then set skew.
Hope this helps. Post if you have more questions.