Transponder issue

[steveng01]

hey guys i got a transponder problem how i can i re apply 119's transponders?

[Anubis]

Please start your own thread next time. You were highjacking someone elses thread so I gave you your own.
See rule #2 here...http://phoenix.satfix.net/showthread.php?352-Rules

Thanks.

Have you tried a factory default then rescanned your 119 sat?

[steveng01]

yeah it seems my transponders are different and sorry bout hijacking

[Anubis]

More info on how they are different would help.
Have you changed any settings accidently?
A factory default should bring everything back then so long as your set up in the menu is correct for your sats they should be there.

[steveng01]

no i havent changed anything

[Anubis]

If a factory default does not bring them back then I would run a straight line from your 119 lnb to your box and see if you can scan them in. If you can then I would replace your switch and you should be good to go. If you can't then replace your lnb.
Just a note. When ever I change an LNB I replace my switch with a new one as well. This way you know you are starting fresh. There is nothing worse than going up to the roof and replacing one, then the switch pops on you so you have to go back up.

Remember to turn off your receiver via back switch then unplug it then remove the line in cable before doing any of the above.
Good luck and keep us posted.

[steveng01]

im just gonna go to my other sat and write them down and then manually post them