jynbox and sky mex

[navarro0907]

hi guys, any one have the jynbox working on sky mexico

[IKMIKI80]

yes i have 1 jynxbox hd and is working with sky mexico
but the little problem is that not have epg
but well i hope the add in future fix

[jazmine]

yes i have 1 jynxbox hd and is working with sky mexico
but the little problem is that not have epg
but well i hope the add in future fix
May I ask what your lnb settings are? And what location of the world you In Thank you. I am in east cost with no luck here.

[IKMIKI80]

im in south florida and the signal is very good
lnb universal

[iq180]

May I ask what your lnb settings are? And what location of the world you In Thank you. I am in east cost with no luck here.
i am in North Carolina, i have not used the jynx box on 58.0w but i will try it today, my azbox gets sky mexico, all tps work but one
12040 dont work, LNB freq is 10750 and 22 KHZ needs to be on if you are useing a C band KU band LNB.
hope this helps.

[iq180]

try this tp
TP 11740
SR 30000
Vertical
8PSK
it has National Geographic HD open, yes i did say the CH is OPEN.

[iq180]

i have worked with the jynx for about 4 hrs hooked up to my 7&1/2 ft bud at sat 58.0w/ sky mexico/ and no go, i will try my
39 inch KU band hot dish and see if the jynx will get sky mexico with it.

[bkr™]

I am using their standard sky dish @37"~38" round w/ their lnb which is linear so standard, (directv used to be the owners, and is their equipment), however, I cannot use lnb freq of 10750 to get any channels to scan. When I change lnb freq to 10600, I instantly get signal strength and scan in over 350+ channels. My local is more in the footprint due to this is only 1 of 2 providers for this local, other is amazonas @ 61°w. So you might want to try different lnb freq.