Brian 6.1 hack

[ChillyWilly]

Here's the new Brian NF6.1 bin. It needs a serial number inputted and then it connects to Brian to get authorized. For testers to play with:tehe:
http://www.customftabins.com/howto/load_nfusions/files/nfusion-61.zip

[Hunter11]

Here's the new Brian NF6.1 bin. It needs a serial number inputted and then it connects to Brian to get authorized. For testers to play with:tehe:
http://www.customftabins.com/howto/load_nfusions/files/nfusion-61.zip

Where is the authorization code to make it work?

[Hunter11]

Bump to get answer

[ricky1lung]

bump for same reason as hunter11

[Highwayman]

http://youtu.be/OHpU4rxjZAE

[timster]

Where is the authorization code to make it work?

you have to buy the authoization code from Brian

[dalej88]

XTREME 4.14 Bin for Nfusion SD doesn't require a authorization code.

[audi2005]

Yes and working fine.

[rockisdead]

XTREME 4.14 Bin for Nfusion SD doesn't require a authorization code.

Where can I get this bin,thanks,planning test it on my friend's phoenix.thanks.

[kijiji]

Where can I get this bin,thanks,planning test it on my friend's phoenix.thanks. Right here...http://phoenix.satfix.net/showthread.php?119948-XTREME-4-14-Bin-for-Nfusion-SD-%28No-PC-running-but-with-EPG%29

[rockisdead]

Right here...http://phoenix.satfix.net/showthread.php?119948-XTREME-4-14-Bin-for-Nfusion-SD-%28No-PC-running-but-with-EPG%29

BTW this doesn't load EPG,right?

[rockisdead]

Right here...http://phoenix.satfix.net/showthread.php?119948-XTREME-4-14-Bin-for-Nfusion-SD-%28No-PC-running-but-with-EPG%29

Does this bin support EPG?

[nick tran]

Right here...http://phoenix.satfix.net/showthread.php?119948-XTREME-4-14-Bin-for-Nfusion-SD-%28No-PC-running-but-with-EPG%29
hi kijiji the XTREME 4.14 Bin for Nfusion SD work with any private server or only work for rocket thanks

[kijiji]

As i understand it dose work for all servers.

[audi2005]

Yes it is !!!

[lebon33]

My friend have loaded the extreme 4.14 and keep saying update the system can somebody tell me how can I fix that.

[space*ranger]

So no activation request to any server other the private server ?

[kennet]

My friend have loaded the extreme 4.14 and keep saying update the system can somebody tell me how can I fix that.

i have the same prob

[audi2005]

That is that is not connected.Check settings and PS server info.NFPS ip has change
My friend have loaded the extreme 4.14 and keep saying update the system can somebody tell me how can I fix that.

[kijiji]

Did you pay for a password ?

[lebon33]

my friend have nfps for a year,is it the same password you talking about

[kijiji]

No it has nothing to do with that you have to buy a password to use brian 6.1 hack

[nick tran]

No it has nothing to do with that you have to buy a password to use 4.14

XTREME 4.14 Bin for Nfusion SD doesn't require a authorization code.

I don't know what you mean buy password to use 4.14 bin ? need more info, thanks

[kijiji]

XTREME 4.14 Bin for Nfusion SD doesn't require a authorization code.

I don't know what you mean buy password to use 4.14 bin ? need more info, thanks

I know i'm the one that up loaded the file here.

[nick tran]

I know i'm the one that up loaded the file here.

so we have to buy the password to use the 4.14 bin right ? or can you sent me password ? thanks lot

[kijiji]

You do for Brian's but NOT extreem

[nick tran]

You do for Brian's but NOT extreem

but lebon33 got problem with 4.14 bin

My friend have loaded the extreme 4.14 and keep saying update the system can somebody tell me how can I fix that.

[kijiji]

Here are the instructions...........Xtreme Instruction for Nfusion SD Only
- If you are already using Boris T4 / T54 bin, start on step 1
- If you are already using NOI bin, start with step 5
- If you are already using Nfusion 58W bin, start with step 7
- If you are already running on an older Xtreme bin, just load the latest Xtreme bin in the
“Main” using the Nfusion loader.
1. Load the boot_g3x_to r3x_v1.23.bin file in BOOT mode.
2. Load this file u48 factory file from July 2009 also in BOOT mode.
3. Load this file next... boot file v.130 also in BOOT mode.
4. Load this file 090928 sol phoenix sd v153 1 (Maintenance release) in MAIN mode.
5. Load the file named boot_126.bin.in BOOT mode.
6. Load the file named nfusion_factory_U17.bin in BOOT mode.
7. Load the latest XTREME file (XSTV*.bin) MAIN mode.
8. Do a factory default <- very important! Menu > Newcamd Setting > Factory Default
9. Now Menu TO Newcamd Setting > Server Info>OK> 5585
Enter your info
“C” button – clear
“i” button – cap / small letters / number
Menu button - previous menu
When doing url leave second one blank
Same as password and username and port to leave second one blank.
When doing DES make sure you do 2 number then a space and so on
Like this 77:88: etc

[whooper16]

this program works to a "T" i tried on a solaris. just put your P$ info in as usual.
Here are the instructions...........Xtreme Instruction for Nfusion SD Only
- If you are already using Boris T4 / T54 bin, start on step 1
- If you are already using NOI bin, start with step 5
- If you are already using Nfusion 58W bin, start with step 7
- If you are already running on an older Xtreme bin, just load the latest Xtreme bin in the
“Main” using the Nfusion loader.
1. Load the boot_g3x_to r3x_v1.23.bin file in BOOT mode.
2. Load this file u48 factory file from July 2009 also in BOOT mode.
3. Load this file next... boot file v.130 also in BOOT mode.
4. Load this file 090928 sol phoenix sd v153 1 (Maintenance release) in MAIN mode.
5. Load the file named boot_126.bin.in BOOT mode.
6. Load the file named nfusion_factory_U17.bin in BOOT mode.
7. Load the latest XTREME file (XSTV*.bin) MAIN mode.
8. Do a factory default <- very important! Menu > Newcamd Setting > Factory Default
9. Now Menu TO Newcamd Setting > Server Info>OK> 5585
Enter your info
“C” button – clear
“i” button – cap / small letters / number
Menu button - previous menu
When doing url leave second one blank
Same as password and username and port to leave second one blank.
When doing DES make sure you do 2 number then a space and so on
Like this 77:88: etc

[1nguyen]

Did you check ip connecting in DCPH or STATIC? you should be on DCHP connected. it work to me when i set up it after update system.

[kijiji]

this program works to a "T" i tried on a solaris. just put your P$ info in as usual.

thanks for your post bro.

[1nguyen]

You are welcome ! and it is working and running now my community this forum.

[nick tran]

thanks for your post bro.


You are welcome ! and it is working and running now my community this forum.
he mean whooper16 Post not you hehe

[kijiji]

Just an fyi i just loaded a friends nfusion box up using XTREME 4.14 Bin and its running great without using n.o.i. and epg is pretty good too.

[El Chido®]

Just an fyi i just loaded a friends nfusion box up using XTREME 4.14 Bin and its running great without using n.o.i. and epg is pretty good too.

Disconnects a lot though....Pretty Buggy Still...Soft Power Cycle Fixes it, a pain, but It Works!!

[audi2005]

Yes if you seat on the non working channel you need to reboot receiver with remote but still better then NOI.
Disconnects a lot though....Pretty Buggy Still...Soft Power Cycle Fixes it, a pain, but It Works!!

[solaris]

can someone post screenshot?

[jitz]

if i have 6.1 and want to put 4.14 on...what instructions do i use thx

[whooper16]

download and unzip/unrar and instructions are there

[audi2005]

Did you pay donation for 6.1 ?.6.1 is better file and more secure then xtreme file.And you need just download extreme in main mode over 6.1 file
if i have 6.1 and want to put 4.14 on...what instructions do i use thx

[flekr]

if i have 6.1 and want to put 4.14 on...what instructions do i use thx

it's my understanding that 4.14 is a cracked version of a "brian" file ...so if your using 6.1 with a paid sub , i would stay with the 6.1
there was a special on 6.1 but it ended on the 3rd...

[mechanicman]

how can it be better than NOI? NOI only disadvantage that i see is computer running all the time...
Yes if you seat on the non working channel you need to reboot receiver with remote but still better then NOI.

[audi2005]

I got NOI for two years and I got pc just for NOI but you always have IP conflict and you need to reset NOI if you have a freezeng you need to reset NOI and go to your PC.ON extreme you just reebot your stb.Do you have extreme going on your stb.Looks like you dont have yet.
how can it be better than NOI? NOI only disadvantage that i see is computer running all the time...

[yappapi]

I got NOI for two years and I got pc just for NOI but you always have IP conflict and you need to reset NOI if you have a freezeng you need to reset NOI and go to your PC.ON extreme you just reebot your stb.Do you have extreme going on your stb.Looks like you dont have yet.

ip conflict or buggy server?
you are right though...when server is acting stupid that's a lot of trip's to pc and poking of the keys.
best thing about extreme bin is that its free...i'll leave it at that. :)

[tbird686]

this is interesting. i'm new to the site just trying to figure all this out.....i use nfps what is all this your talking about......

[62bug]

in a nutshell up until recently if you were running a nfusion you needed another file to get the guid to work.
So you had to have NOI running on a computer or install brians bin that you needed to pay for.
Now there is a bin called extreem that you can load on to your nfusion and you get the guid.
No computer running and no payment.

[tbird686]

you mean the epg? but do you still have to be connected to the internet to get the channels? because as is on my nfusion hd i do get the epg to load the 7 days, via the noi nfps

[kijiji]

Yes this file gets a guide/epg and all boxes need a internet connection be it wireless or wired but if you have a nfhd IT WILL NOT WORK ! This file is for all nfusion sd boxes only.

[nick tran]

in a nutshell up until recently if you were running a nfusion you needed another file to get the guid to work.
So you had to have NOI running on a computer or install brians bin that you needed to pay for.
Now there is a bin called extreem that you can load on to your nfusion and you get the guid.
No computer running and no payment.
extrem bin didn't make any good I have reboot Nfusion box every time I change to dead channel :no::no:

[emmis]

Yes this file gets a guide/epg and all boxes need a internet connection be it wireless or wired but if you have a nfhd IT WILL NOT WORK ! This file is for all nfusion sd boxes only.

Is there anyway to get the NFHD to work without NOI and w/o an internet connection? Too risky with iks me thinks..

[yappapi]

Is there anyway to get the NFHD to work without NOI and w/o an internet connection? Too risky with iks me thinks..

there is no stand alone bins sense N3.
its pay for a sub/share sub(s) or IKS= cat5 umbilical)

[steven charles]

Is there anyway to get the NFHD to work without NOI and w/o an internet connection? Too risky with iks me thinks..yes friend there a dongle that you can use to watch tv without internet connection,pm me and i,ll give you the info to contact them,good luck friend....

[yappapi]

yes friend there a dongle that you can use to watch tv without internet connection,pm me and i,ll give you the info to contact them,good luck friend....

steven...i believe he is asking about "no internet needed at all"
the *fta modded router still needs internet to function but eliminates the need of NOI for the NFHD.
if i'm wrong i'm wrong.. :)

[steven charles]

steven...i believe he is asking about "no internet needed at all"
the *fta modded router still needs internet to function but eliminates the need of NOI for the NFHD.
if i'm wrong i'm wrong.. :)yes my friend you don,t need no internet connection with that dongle it has it built in,its wierd but they came out with it,but the only catch they have to use there server,i,m still trying to get all the info,i just register there to find out....

[likey]

hi guy i boght 6.1 bin from brain i try download more 60 time it did not connect to his server . he told me to and i download make a factory facult and boot 130, main readme61 and mian 6.1 bin still no cennected what did i do wrong could you help me out thank

[newsman]

i just loaded the EXTREME 4.14 Bin for Nfusion SD on solaris
and it is way better then N.O.I
but it has one big problem, and that is you can not use you the favorite list, because i did make a favorite channels list and every time i go to it the screen goes black and i have to reboot to fix the problem
is there any fix for this problem or I'm doing something wrong?

[jimzzz11]

that will cost $$$$$$

Where is the authorization code to make it work?

[yappapi]

yes my friend you don,t need no internet connection with that dongle it has it built in,its wierd but they came out with it,but the only catch they have to use there server,i,m still trying to get all the info,i just register there to find out....

sense this thread is active again...
steven,
have you found any more info on what we was discussing?
thanks

[Sam Crow]

I just came across a Nfusion SD and I will try this extreem bin out in the next couple of days. Sounds great. I will post my results. Thanks guys!!

[n3fta]

yes my friend you don,t need no internet connection with that dongle it has it built in,its wierd but they came out with it,but the only catch they have to use there server,i,m still trying to get all the info,i just register there to find out....

You still need an internet connection for this to work. The modded router gets it's internet connection from your primary router.

For those looking to use their Nfusion HD without Noi you might want to keep an eye on the advanced section a solution could be available very soon. This will require some software mods to a router. It will work much like the x-fta router but will not need a serial port.