Suggestions ?

[noidea]

Hello All,
I have hooked up 110 119 129 and 82 and 91 My question is that I have 110 119 129 going to disqc port 1 port 2 and port 3. So that leaves me with one remaining Port. So I have 82 on a 22k On and 91 on the 22k Off and then going into port 4 of the disqc.

Is this the correct way to have it set up?

[blackwater]

That should be fine.

[StanW]

Hello All,
I have hooked up 110 119 129 and 82 and 91 My question is that I have 110 119 129 going to disqc port 1 port 2 and port 3. So that leaves me with one remaining Port. So I have 82 on a 22k On and 91 on the 22k Off and then going into port 4 of the disqc.

Is this the correct way to have it set up?
I would connect 91 ( or 82) to the 4th port on the diseqc , from diseqc to off side of 22khz and remaining bev lnb to on side of 22khz.

[noidea]

Ok Thanks for your suggestions! I will try both ways and see if there is a difference with the two ways that was suggested. Thanks for you help guys.

[Glatt]

I use an Sw21 switch! sw21 port 1 to disqc and then sw21 port 2 to 82!