Log in

View Full Version : Sw21 with 22kh?


surveyor1951
06-10-2012, 09:20 PM
I've used up all my diseqc switches, they started ghosting on the ports. I have a few sw21's & a couple 21kh switches. Can I run the sw21 with the 22kh switch on my legasy lnb's. I'm trying to run 119,110 & 91 sats to a couple of my receivers. If I can, would I put the 119 & 110 on the 22kh switch then to port 1 on the sw21 with 91 to port 2 on the sw21. Would this work on sw21 & Legasy lnb's. I just need a temporary fix till I order some more Chieta diseqc switches. Any help would be much apprieciated. Thanks
ottid142
06-10-2012, 10:35 PM
I've used up all my diseqc switches, they started ghosting on the ports. I have a few sw21's & a couple 21kh switches. Can I run the sw21 with the 22kh switch on my legasy lnb's. I'm trying to run 119,110 & 91 sats to a couple of my receivers. If I can, would I put the 119 & 110 on the 22kh switch then to port 1 on the sw21 with 91 to port 2 on the sw21. Would this work on sw21 & Legasy lnb's. I just need a temporary fix till I order some more Chieta diseqc switches. Any help would be much apprieciated. Thanks

You would be better off running the 110/119 LNBs into the SW21 and then running that to the off side of the 22Khz switch. You would then run from the 91 LNB to the on side of the 22kHz. Both switches are compatible with Legacy LNBs.
surveyor1951
06-10-2012, 11:14 PM
I will try that out tonite after work. Thanks, that was very helpful
surveyor1951
06-22-2012, 03:50 PM
I tried connecting the sw21 with 119 & 110 to the 22kh switch on the off side & 91 to the on side of 22kh switch but I could only get 119 & 91through the 22kh to the receiver (Limesat Ultra V2) & tv. I then reversed the 91 sat to the off side of 22kh & 119 & 110 sats from 21 switch to the on side of 22 kh switch & still could not get 110 sat to show on the receiver. Any other ideas on this setup I could try.
ottid142
06-24-2012, 07:39 PM
I tried connecting the sw21 with 119 & 110 to the 22kh switch on the off side & 91 to the on side of 22kh switch but I could only get 119 & 91through the 22kh to the receiver (Limesat Ultra V2) & tv. I then reversed the 91 sat to the off side of 22kh & 119 & 110 sats from 21 switch to the on side of 22 kh switch & still could not get 110 sat to show on the receiver. Any other ideas on this setup I could try.

Post yor settings for both ways you triied